4 Link Suspension Systems

 
Part # Description Price Qty Purchase


CW-6205

 Battle Crusier 4 Link Kit (Frame Mount)
Take a close look at our new Battle Cruiser 4-link. When our customers told us they were having a hard time getting a large wrench around the welded-on adjustment nut, we went right to work redesigning our 4-link. By machining much-smaller wrench flats directly into the tube, it is now possible to maneuver a wrench between the link tubes. Chassisworks is the only company that features completely CNC-machined, 1x.156" direct-threaded tube 4-link bars. Bars are available in gold-irridite or chrome finishes. Each 4-link comes with a complete "map" of all possible adjustments and resulting intersections, greatly simplifying chassis tuning. Our 4-links set the standard with 3/16"-thick, 360-degree mounting plates and 3"-diameter holes. These can easily be trimmed to accommodate larger housings. We also polish all 4-link tubes, this polishing process provides a much smoother surface before they are plated. Whether you choose gold-irridite or chrome finish, you get a high quality finished appearance. The 4-link front mount attaches under the rear frame rail and is used for rear subframes and Eliminator I chassis. All hardware is included. Rod ends must be purchased separately and vary with the application.

$184.00/ea



CW-6206

 Avenger 4 Link Kit
This exclusive design incorporates the latest technological advances in 4-link dimensioning, tuning and efficiency. By using 12-point, 1/2" bolts in the brackets, we moved the holes much closer together - providing much finer adjustment than was possible before. To accomplish this, we use a custom-made, 1/2" bore with 7/8" shank rod end (Part No. 6244). All brackets are constructed of 3/16" 4130 plate. Axle brackets feature a 3-1/4" tube hole, built-in lower wheelie-bar mount, lower antiroll-bar mount, and double-sheer, adjustable lower shock mount. Our billet-aluminum lower shock mounts are adjustable in 5/8" increments for fine tuning ride height. Our 4130 link tubes are a full 1 3/8" OD, with weld-in adapters and hex adjusters. This design is considerably more resistant to bending than conventional 4-links with direct-thread, 1"-OD tubes. Like all Chassisworks 4-links, this version comes with a map of all intersect points and tuning instructions to simplify adjustments. Use Part No. 6275 track locater or a No. 6280 wishbone to center the rear end housing in the chassis. The Avenger 4-link can be used with all Chassisworks Eliminator II or Avenger round tube subframes or chassis.

$556.00/kit



CW-6246

 Eliminator II 4 Link Kit
This exclusive design incorporates the latest technological advances in 4-link dimensioning, tuning and efficiency. By using 12-point, 1/2" bolts in the brackets, we moved the holes much closer together - providing much finer adjustment than was possible before. To accomplish this, we use a custom-made, 1/2"-bore with 3/4"-shank rod end 6276. The 3/16" thick mild steel brackets with 3" axle tube hole feature built-in lower wheelie-bar mount, lower antiroll-bar mount, and double-sheer, adjustable lower shock mount. Our billet-aluminum lower shock mounts 6227 and 6247 are adjustable in 5/8" increments for fine tuning ride height. Our 4130 link tubes are a full 1-1/4" OD, with weld-in adapters and hex adjusters. This design is considerably more resistant to bending than conventional 4-links with direct-thread, 1"-OD tubes. Like all Chassisworks 4-links, this version comes with a map of all intersect points and tuning instructions to simplify adjustments. Track locater 6275, and wishbone 6230 or 6280 can be used to center the rear end housing in the chassis. Part 6246, Eliminator II 4-link, can be used with all Chassisworks Eliminator II round tube subframes and chassis.

$257.00/kit


CW-6248

 Pro Street 4-Link (Frame Mount)
Our popular Pro Street 4-link uses the same bracket geometry as our Battle Cruiser 4-link. Instead of spherical-bearing rod ends, it uses billet-steel rod ends with urethane bushing liners. In addition, one end of the link tube uses a urethane-lined weld eye, which virtually eliminates the possibility of the rod end rattling, causing the link bar to fall off. The bars are direct-thread, 1-1/4x.156" tube to accommodate the huge 1"-shank billet rod end. These rod ends are strong enough for blown street cars and offer plenty of flexibility for a street-driven vehicle. Pro Street 4-links are available with blue-powder coating or chrome-finish link bars. The 4-link front mount attaches under the rear frame rail, and is used for rear subframes and Eliminator I chassis. All hardware and billet rod ends are included.

$386.00/kit


CW-6250

 4-Link for 4X2" Frame
Take a close look at our new Battle Cruiser 4-link. When our customers told us they were having a hard time getting a large wrench around the welded-on adjustment nut, we went right to work redesigning our 4-link. By machining much-smaller wrench flats directly into the tube, it is now possible to maneuver a wrench between the link tubes. Chassisworks is the only company that features these completely CNC-machined, 1x.156" direct-threaded tube 4-link bars. Bars are available in gold-irridite or chrome finishes. Each 4-link comes with a complete "map" of all possible adjustments and resulting intersections, greatly simplifying chassis tuning. Our 4-links set the standard with 3/16"-thick, 360-degree mounting plates and 3"-diameter holes. These can easily be trimmed to accommodate larger housings. We also polish all 4-link tubes, this polishing process provides a much smoother surface before they are plated, so whether you choose gold-irridite or chrome finish, you get a high quality finished appearance. The 4-link front mount attaches under the 4x2" rear frame rail in our subframe. All hardware is included. Rod ends must be purchased separately and vary with the application.
 

$199.00/ea


CW-6251

 4-Link Pro Street for 4X2" Frame
Our popular Pro Street 4-link uses the same bracket geometry as our Battle Cruiser 4-link. Instead of spherical-bearing rod ends, it uses billet-steel rod ends with urethane bushing liners. In addition, one end of the link tube uses a urethane-lined weld eye, which virtually eliminates the possibility of the rod end rattling, causing the link bar to fall off. The bars are direct-thread, 1-1/4x.156" tube to accommodate the huge 1"-shank billet rod end. These rod ends are strong enough for blown street cars and offer plenty of flexibility for a street-driven vehicle. Pro Street 4-links are available with blue-powder coating or chrome-finish link bars. The 4-link front mount attaches under the 4x2" rear frame rail in our subframe. All hardware and billet rod ends are included. 

$392.00/ea


CW-6269

 Battle Cruiser 4-Link 3x2" Mount
Take a close look at our new Battle Cruiser 4-Link. When our customers told us they were having a hard time getting a large wrench around the welded-on adjustment nut, we went right to work redesigning our 4-link. By machining much-smaller wrench flats directly into the tube, it is now possible to maneuver a wrench between the link tubes. Chassisworks is the only company that features these completely CNC-machined, 1x.156" direct-threaded tube 4-link bars. Bars are available in gold-irridite or chrome finishes. Each 4-link comes with a complete "map" of all possible adjustments and resulting intersections, greatly simplifying chassis tuning. Our 4-links set the standard with 3/16"-thick, 360-degree mounting plates and 3"-diameter holes. These can easily be trimmed to accommodate larger housings. We also polish all 4-link tubes before they are finished. Whether you choose gold-irridite or chrome finish, this polishing process provides a much smoother surface for a better finish. The 4-link front mount attaches to a 3x2" dropped crossmember and is used in trucks and full-frame stock vehicles. Available with gold-irridite or chrome-finish link bars for either configuration. All hardware is included. Rod ends must be purchased separately and vary with the application.

$197.00/ea


CW-6270

 Pro Street 4-Link 3x2" Mount
Our popular Pro Street 4-link uses the same bracket geometry as our Battle Cruiser 4-link. Instead of spherical-bearing rod ends, it uses billet-steel rod ends with urethane bushing liners. In addition, one end of the link tube uses a urethane-lined weld eye, which virtually eliminates the possibility of the rod end rattling, causing the link bar to fall off. The bars are direct-thread, 1-1/4x.156" tube to accommodate the huge 1"-shank billet rod end. These rod ends are strong enough for blown street cars and offer plenty of flexibility for a street-driven vehicle. Pro Street 4-links are available with blue-powder coating or chrome-finish link bars. The 4-link front mount attaches to a 3x2" dropped crossmember and is used in trucks and full-frame stock vehicles. All hardware and billet rod ends are included.

$396.00/ea


CW-6278

 Eliminator II Pro Street 4-Link
This exclusive design incorporates the latest technological advances in 4-link dimensioning, tuning and efficiency. By using, 1/2" bolts in the brackets, we moved the holes much closer together - providing much finer adjustment than was possible before. To accomplish this, we use a custom-made, 1/2"-bore Billet Urethane rod end. The 3/16" thick axle brackets have a 3" hole and feature a built-in lower wheelie-bar mount, a lower antiroll-bar mount and a double-sheer, adjustable lower shock mount. Our billet-aluminum 6227 and 6247 lower shock mounts are adjustable in 5/8" increments for fine tuning ride height. Requires a 6214 shock-mount spacer kit. Our Eliminator II Pro Street 4-link uses the same geometry as our Standard Eliminator II 4-link. Instead of spherical bearing rod ends it uses billet steel rod ends with urethane bushing liners. In addition, one end of each link tube uses a urethane lined weld eye, which virtually eliminates the possibility of the rod end rattling loose, causing the link bar to fall off. The bars are direct threaded 1-1/4" x .156 wall tube to accommodate the huge 1"-shank billet rod ends. These rod ends are strong enough for blown street cars and offer plenty of flexibility for street driven vehicles. Eliminator II Pro Street 4-links are available with blue powder coating or chrome finish link bars. Like all Chassisworks 4-links, this version comes with a map of all intersect points and tuning instructions to simplify adjustments. Use track locater Part No. 6249 to center the rear end housing in the chassis. This 4-link fits all Chassisworks Eliminator II round tube subframes and chassis.

$457.00/ea


CW-6292

 Eliminator II 4-Link for 3x2" Mount
This exclusive design incorporates the latest technological advances in 4-link dimensioning, tuning and efficiency. By using 12-point, 1/2" bolts in the brackets, we moved the holes much closer together - providing much finer adjustment than was possible before. To accomplish this, we use a custom-made, 1/2"-bore with 3/4"-shank rod end 6276. The 3/16" thick mild steel brackets with 3" axle tube hole feature built-in lower wheelie-bar mount, lower antiroll-bar mount, and double-sheer, adjustable lower shock mount. Our billet-aluminum lower shock mounts 6227 and 6247 are adjustable in 5/8" increments for fine tuning ride height. Our 4130 link tubes are a full 1-1/4"-OD, with weld-in adapters and hex adjusters. This design is considerably more resistant to bending than conventional 4-links with direct-thread, 1"-OD tubes. Like all Chassisworks 4-links, this version comes with a map of all intersect points and tuning instructions to simplify adjustments. Track locater 6275, or a wishbone (Part 6230 or 6280) can be used to center the rear end housing in the chassis. This 4-link can be used with all Chassisworks Eliminator II 3x2" subframes.

$268.00/ea


CW-6293

 Eliminator II Pro Street 4-Link for 3x2" Mount
This exclusive design incorporates the latest technological advances in 4-link dimensioning, tuning and efficiency. By using 12-point, 1/2" bolts in the brackets, we moved the holes much closer together - providing much finer adjustment than was possible before. To accomplish this, we use a custom-made, 1/2"-bore with 3/4"-shank rod end 6276. The 3/16" thick mild steel brackets with 3" axle tube hole feature built-in lower wheelie-bar mount, lower antiroll-bar mount, and double-sheer, adjustable lower shock mount. Our billet-aluminum lower shock mounts 6227 and 6247 are adjustable in 5/8" increments for fine tuning ride height. Our 4130 link tubes are a full 1-1/4"-OD, with weld-in adapters and hex adjusters. This design is considerably more resistant to bending than conventional 4-links with direct-thread, 1"-OD tubes. Like all Chassisworks 4-links, this version comes with a map of all intersect points and tuning instructions to simplify adjustments. Track locater 6275, or a wishbone (Part 6230 or 6280) can be used to center the rear end housing in the chassis. This 4-link can be used with all Chassisworks Eliminator II 3x2" subframes.

$468.00/ea

Back to Suspension

 

Website and Contents Copyright © 2006-2010 Hot Rod Depot, LLC. All rights reserved.  Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Generally speaking, the name of the photo will correspond to the respective product. Other products and companies referred to herein are trademarks or  registered trademarks of their respective companies or mark holders. Sales taxes are applicable to Nevada residents only. Thank you for choosing Hot Rod Depot!

Home    |   Terms and Conditions   |   Return Policy   |   Contact Us   |   Email List

Hot Rod Depot 2510 E Sunset Rd #7 Las Vegas, NV 89120