|
50's Chevy |
 |
SHOEBOX 'STUFF'
HEIDT'S
'55-'57 Chevy top quality steering, suspension, and
brake components. HEIDT's is the preferred brand for
street rods. |
 |
Upper A-Arms
(Pair) |
|
 |
Lower A-Arms
(Pair) |
|
|
TUBULAR UPPER A-ARMS
Tubular Upper A-Arms are
the ultimate in looks. Direct replacement for stock
upper A-arms, they include new design cross shafts which
have offset built in to increase camber adjustability.
All welds are heli-arc welded for maximum strength.
Stainless arms are fully polished (except cross shafts).
Arms are ready to install, including new cross shafts
ball joints and bushings.
|
TUBULAR LOWER A-ARMS
Our Lower A-Arms are a
perfect match to our Upper A-Arms. The lower ball joint
is the correct, compression type, not a tension
ball joint turned upside down. Spring pocket is stamped.
A-Arms include stabilizer tabs and steering stops welded
in place. Also included are new cross shafts, ball
joints and bushings and come fully assembled, ready to
install.
|
|
COIL-OVERS & LOWER ARMS
 |
 |
| Coil-Over
Shocks, Pr. |
Coil-Over Shock
& Lower A-Arm |
|
2" DROPPED STEEL SPINDLES
|
2" Dropped Steel Spindle |
 |
 |
|
COIL-OVERS & LOWER ARMS
Coil-Over shocks have fully
adjustable dampening, and assorted spring rates. Full
length springs assure full travel and smooth ride. They
also fit stock lower arms using adapter kit CS-020.
Tubular lower A-Arms come fully assembled, and are
available in either plain steel or fully polished
stainless steel.
|
2" DROPPED STEEL SPINDLES
Our 2" Dropped Spindles are
full steel spindles, just like factory spindles. This is
much stronger than cast iron. They use your stock
steering arms, with no loss of turning radius. No
realignment required. The caliper brackets bolt on like
mid-70's Chevys, allowing many brake options shown.
|
|
|
|
Upper Control Arms |
|
Part
# |
Description |
Price |
Qty
|
Purchase |
| HDT-CA201 |
1955-57 Chevy Tubular Upper Control Arms |
$318.95/pr |
|
|
| HDT-CA201SS |
1955-57 Chevy Stainless Tubular Upper Control Arms |
$448.95/pr |
|
|
| HDT-CA201N |
1955-57 Chevy Narrowed Tubular Upper Control Arms |
$318.95/pr |
|
|
| HDT-CA201SSN |
1955-57 Chevy Narrowed Stainless Tubular Upper Control Arms |
$448.95/pr |
|
|
|
Lower Control Arms |
|
Part
# |
Description |
Price |
Qty
|
Purchase |
| HDT-CA203 |
1955-57 Chevy Tubular Lower Control Arms |
$518.95/pr |
|
|
| HDT-CA203SS |
1955-57 Chevy Stainless Tubular Lower Control Arms |
$748.95/pr |
|
|
| HDT-CA203NM |
1955-57 Chevy Narrowed Tubular Lower Control Arms
Std |
$518.95/pr |
|
|
| HDT-CA203SSNM |
1955-57 Chevy Narrowed Stainless Tubular Lower Control Arms
Std |
$748.95/pr |
|
|
| HDT-CA203M |
1955-57 Chevy Narrowed Tubular Lower Control Arms
for Coil-Overs |
$518.95/pr |
|
|
| HDT-CA203SSM |
1955-57 Chevy Narrowed Stainless Tubular Lower Control Arms
for Coil-Overs |
$748.95/pr |
|
|
|
Other Items |
|
Part
# |
Description |
Price |
Qty
|
Purchase |
| HDT-SP102 |
1955-57 2" Drop Spindle Kit w/Late Model GM
Brackets |
$288.95/pr |
|
|
| HDT-SP102B |
1955-57 2" Drop Spindle Kit w/ Early
Chevelle Brackets |
$288.95/pr |
|
|
| HDT-CQ001 |
1955-57 QA1 Coiover Shocks w/Springs
|
$498.95/pr |
|
|
| HDT-CQ010 |
1955-57 Lower Spring Bearing Rings |
$24.95/ea |
|
|
| HDT-CS020 |
1955-57 Coil-Over Spring Adaptor Kit
for Stock Lower Arms |
TBA |
|
|
| HDT-TA-001 |
Spanner Wrench |
$11.95/ea |
|
|
