®

Home Ford Parts GM Parts Dodge Parts Gift Shop Contact Us


 

 

Bolt In Front Clips

HEIDT’S has done it again, releasing it’s new `67-`69 Camaro Front Subframe featuring their new Pro-G™ Front Suspension. This state of the art suspension was designed specifically for this new subframe which bolts directly in place with no floor modifications. This is not just another warmed-over or adapted street rod suspension kit, but it is truly a new system, designed for absolute handling and performance, with true race car geometry and characteristics. 1-1/4” Upper and 1-1/2” lower Tubular arms, HEIDT’S Billet Adjustable Coil-Overs, 11” brakes, Tall Dropped Spindles, and Rack & Pinion are included. Options include Trans Crossmember, Polished Stainless Control Arms, Polished Billet Coil-Overs, 12” and 13” Disc Brakes, power Rack & Pinion, and Front Sway Bar.  Shipped in a palletized box, by truck, freight collect.

Camaro / Nova Bolt In Front Clip
Part # Description Price Qty Purchase



HDT-CF101

1967-69 Camaro & Firebird 1968-72 Nova Bolt In Front Clip by Heidts
"Truck Freight Collect"
(ie shipping is due upon receipt)


 

$4350.00/ea



CW-7701

1967-69 Camaro & Firebird 1968-72 Nova Bolt In Front Clip (Only) by Chassisworks
"Truck Freight Collect"
(ie shipping is due upon receipt)
Direct bolt-on-clip for '67-69 Camaro, Firebird, and '68-72 Nova. The frame is factory welded in our special fixture. It is laser cut, formed and welded out of 7 gauge steel. Front clip keeps the tire in the stock location, there is ample room for up to a 17"x8" front wheel with 4-3/4" back space and P225/45-17" tires. You will reuse the factory radiator core support and bolt it into the front clip. Your front bumper, radiator, and grille will bolt back in the original location with the weld-nuts fabricated into the frame. We manufacture the billet rack-&-pinion to match the suspension crossmember width. When you add the Street Machine front suspension package to the clip, this assures you will have perfect suspension geometry (unlike our competitors who only have "Mustang II" suspension crossmembers and tell you they will fit the Camaro, Firebird, and Nova). The engine is mounted in the stock location, with billet side mounts or motor plate and mid plates. The package includes welded frame with all suspension mounting points; mid-plate brackets; emergency brake cable mounts; hardware and fasteners; and 104-page photo-illustrated instruction guide. Billet motor mounts or motor plates; and bolt-in mid-plates; urethane or aluminum body bushing; clutch pivot shaft bracket; rubber inner fender splash guards, and bolt-in subframe connectors are optionally available. Shipped in a palletized box, by truck, freight collect.

$1789.00/ea


CW-6816

Aluminum Body Bushings For use in high performance applications. These aluminum body bushings stiffen the chassis by replacing the rubber OEM bushings. Use to mount a front frame to a unibody on a '67-69 Camaro or Firebird.

$79.00/pr

CW-6822

Urethane Body Bushings For use in high performance Street machine applications. These urethane body bushings stiffen the chassis yet allow some vibration damping by replacing the rubber OEM bushings. Use to mount a front frame to a unibody on a '67-69 Camaro or Firebird.

$99.00/pr

Chevy II Bolt In Front Clip
Part # Description Price Qty Purchase


CW-7700

1962-67 Chevy II Bolt In Front Clip
"Truck Freight Collect"
(ie shipping is due upon receipt)
Direct bolt-on-clip for Chevy II '62-67. The frame is factory welded in our special fixture. It is made of mandrel bent 2x4x.120" and 2x3x.120" tubing; laser cut, formed and welded 7 gauge steel. The forward struts are CNC bent and fixture-welded for precise fit. The Gemini connector on the lower end of the strut allows it to be secured to the front frame with a joint stronger than a weld or bolts. The front clip moves your front tire in 3/4" on each side and back 1/2" from the stock dimensions. This gives you ample room for up to a 17"x8" front wheel with 4-3/4" back space and P225/45-17" tires. You will reuse the factory radiator core support and bolt it into the front clip. Your front bumper, radiator, and grille will bolt back into the original location with the weld-nuts fabricated into the frame. We manufacture the billet rack-&-pinion to match the suspension crossmember width. When you add the Street Machine front suspension package to the clip, this assures you will have perfect suspension geometry at the narrowed width (unlike our competitors who only have "Mustang II" suspension crossmembers and tell you they will fit the Chevy II). The engine is mounted in the stock location, with billet side mounts or motor plate and mid plates. The package includes welded frame with all suspension mounting points; a pair of bolt-on forward struts; hardware and fasteners; shim pack to align fenders; and 122-page photo-illustrated instruction guide. Fender and hood hinge mounts; aluminum inner panels; Billet motor mounts or motor plates; and bolt-in mid-plates are optionally available. Shipped in a palletized box, by truck, freight collect.

$1269.00/ea


CW-6650

1962-65 Aluminum Upper Inner Fender w/Hood Hinge Mounts Designed for the '62-65 Chevy II bolt-on front frame, these parts are a perfect compliment. They are designed to fit correctly to the fenders, hood, and radiator mount and provide a mounting point for the hood hinge. These structures mount to the firewall, and to the forward radiator mount providing a rigid connection and an accurate mounting beam for the original equipment steel front fenders as well as our inner fender splash guards. 

$219.00/pr


CW-6651

1962-65 Aluminum Inner Fender Panel Complete your '62-65 Chevy II bolt-on front frame clip installation with these inner-fender panels. The installation separates the wheel well and the engine compartment. These panels are CNC cut to match the mounts and have a cut out and rubber boot cover for the suspension opening. Chassisworks Embossed.

$199.00/pr



CW-6652

1966-67 Aluminum Upper Inner Fender w/Hood Hinge Mounts Designed for the '66-67 Chevy II bolt-on front frame, these parts are a perfect compliment. They are designed to fit correctly to the fenders, hood, and radiator mount and provide a mounting point for the hood hinge. These structures mount to the firewall, and to the forward radiator mount providing a rigid connection and an accurate mounting beam for the original equipment steel front fenders as well as out inner fender splash guards. 

$219.00/pr


CW-6653

1966-67 Aluminum Inner Fender Panel Complete your '62-65 Chevy II bolt-on front frame clip installation with these inner-fender panels. The installation separates the wheel well and the engine compartment. These panels are CNC cut to match the mounts and have a cut out and rubber boot cover for the suspension opening. Chassisworks Embossed.

 

$199.00/pr

Back to Suspension


Auto Meter Gauges

2010-Up Camaro Specials


2010-2012 Camaro Rear Window Louvers

2010-2012 Camaro Tail Panel Blackout


2010-Up Camaro Headers


DiabloSport inTune Programmer

2010-Up Camaro Billet Grills


2010-Up Camaro Street Scene Body Kits


2010-Up Camaro Hoods
New Bumble Bee Style


2010-Up Camaro Engine Caps


2010-Up Camaro Headlight/Tail Light Covers


Edelbrock E-Force SuperCorvettes - Camaro and Corvette Systems


Hushmat Premium Insulation

Website and Contents Copyright © 2006-2013 Hot Rod Depot, LLC a Division of Depot Automotive Group® All rights reserved. Information and prices are subject to change without notice. Photos are for graphical representation only and may not be the exact product you are ordering. Generally speaking, the name of the photo will correspond to the respective product. Other products and companies referred to herein are trademarks or  registered trademarks of their respective companies or mark holders. Sales taxes are applicable to Nevada residents only. Thank you for choosing Hot Rod Depot!

Home   |   Terms and Conditions   |   Return Policy   |   Links   |   Sitemap   |   Car Shows   |   Contact Us

 

        


Hot Rod Depot 2510 E Sunset Rd #3 Las Vegas, NV 89120